|
CMP SmartPower-Universal SeriesTM
ATS (Automatic Transfer Switch)/AMF (Automatic Mains Failure)
The Problem: the damages caused by voltage failure and low power quality, even if for a short time, in terms of lost communication are very well known.
The Goal: to improve the continuity of electricity supply and the efficiency of the generator set start up and maintenance via the use of an intelligent device.
The Solution: ATS/AMF with high reliability, well protected, dual mode operation, and remote operation and monitoring.
System Key Features:
- High Reliability and Proven Design
- Wall Mounted Compact Enclosure (w600xh800xd210mm)
- Dual Operation Mode (Auto/Manual)
- Remote operation and monitoring via RS485,RS232,LAN,Ethernet)
- Controller with wide range operating voltage (6.7-35 VDC)
- Minimize the number of relay (only 3 Relay DC)
- No AC Relay (avoid from mains lightning surge)
- To prevent premature damage, coils are not energized continuously
- All controller contacts are protected from surges by built in varistors
System Specifications:
-
Power Capacity : 5 kVA - 1 MVA
-
1 phase or 3 phase system
-
Voltage operation range 220VAC/380VAC
-
System configuration :
- Type 1+0 (Main Supply + Genset).
- Type 1+1 (Main Supply + Genset 1 + Genset 2)
- Type 2+1 (Genset 1 + Genset 2 + Genset 3)
- Prime or stand by of Peak Saving Electrical Power Supply
ATS Key Features:
- Automatic Transfer Switch (ATS) :
-
No operating voltage required after change over (Mechanical latch mechanism)
-
High speed change over (13 ms)
-
Contact pressure is kept by leaf spring (no change in contact due to voltage fluctuations)
-
Switching durability (Mechanical=50,000 times & Electrical=250,000 times)
-
Manual and automatic operation
Controller Key Features:
- Controller will protect system from:
- Under and Over Voltage
- Under and Over Frequency
- Excessive Voltage Hysterisis
- Unbalance Voltage
- Low oil pressure
- High engine temperature
- Controller Electrical measurement:
- Voltage (p-p,p-n) Mains and Generator
- Current Mains and Generator
- Power (active, reactive and apparent)
- Frequency (45..65 Hz)
- Energy (active and reactive)
- Power Factor
- Controller Special Features:
- Generator protection (overload and short circuit)
- 12 digital inputs all programmable
- 2 engine hour counter (one of these visible and reset-able only from PC)
- Maintenance interval setting
- Safety copy of parameters in flash memory
- Information page that can be filled with free user data
- Personalised logo on LCD screen
- “HELP” messages
|
HOME
AC SOLUTION
